Four-Sided Flanging Machine

Four-sided flanging/tongue-and-groove machine

The Four-sided tongue-and-groove machine is mainly used in conjunction with the polyurethane edge-sealing sandwich panel. The complete sealing of the end face of the core material is achieved through the cooperation of the folded edge and the blocking plate.

Device parameters:

1. Oil cylinder: 80mm, stroke 200mm, 8pcs;

2. Hydraulic station system pressure: <10Mpa; pump flow 20L/min;

3. Modules of the upper and lower synchronous gear racks: m=2;

4. roller synchronizing rack and pinion module: m=2;

5. Upper die material: Cr12; Lower die material: T10A;

6. L-shaped bending: height up to 150mm, actual width;

7. Roller diameter: C60mm; Support roller diameter: C60mm; .

8. PLC Delta brand

Features of processed tongue and groove panel products:

1. Concealed nail connection, no exposed screws on the surface.

2. The building wall is beautiful and smooth, the surface is smooth and flat, and the four-sided steel plate maintenance section replaces the decorative effect of the aluminum plate curtain wall.

3. The bending load resistance, the mechanical properties of the wall, and the dependence on the auxiliary steel structure are reduced.

4. There is no edge at the vertical docking point, and the surface is flat

5. The direct corner of the outer wall has no edge, which makes the corner part more delicate and straight.

6. It has good air tightness, water tightness and thermal insulation performance

Sandwich panels are a popular solution for obtaining insulation. The construction industry relies on good quality panels due to its several advantages. Countries, where there are extreme weather conditions require insulated panels to support the construction process. The Gulf countries, including Oman, are well known for the booming commercial and residential real estate market. The sandwich panels stand as a barrier against extreme weather conditions in the Gulf countries. 

The confluence of durability and availability is the most common factor for completing an ongoing project. In this context, the sandwich panel will help to gleam through the ongoing construction project work. What is a sandwich panel? This question may brim on your mind. Sandwich panels are structural materials. It comprises a stiff core along with two face sheets. It has the top-notch structural ability, cost-effectiveness, and unparalleled durability. Here, we will unravel more advantages of sandwich panels. 

Are you going to choose a material that possesses suitable thermal insulation properties? Sandwich panels in Oman can be the good one for you. Choosing a sandwich panel would be a clever task, whether it is a construction project or any other. The sandwich panel helps to lower energy costs. On top of that, it will decrease mold formation risk along with excess humidity.

Over the years, people are using sandwich panels due to their exceptional performance. When exposed to fire, they can withstand temperatures up to 1000 degrees centigrade. Most of the engineers and the building owners prefer sandwich panels for ensuring the safety of the employees and the equipment. 

Sandwich structures are cost-effective as the core materials are not that expensive compared to other composite materials. On top of that, the durability of the fabric helps to cut off the maintenance cost.

There are solid laminates that are available on the market. Compared to the same, sandwich panels have a high strength-to-weight ratio. In turn, it can support required loads during transportation. It directly cuts off the transportation cost. Isn’t that great?

Color steel sandwich panel is an insulation composite maintenance board made of color coated steel plates or other panels and bottom plates and insulation core materials through adhesives. It is mainly used in anti-corrosion, pressure vessel manufacturing, power construction, petrochemical, and pharmaceutical industries . The sandwich panel is light in weight, about 10kg~14kg/square meter, equivalent to 1/30 of the brick wall; Thermal insulation, sealing performance good; convenient construction, flexible and fast installation, construction period can be shortened by more than 40%; Bright, beautiful appearance, no need for surface decoration; high strength, can be used as maintenance structure, load-bearing structure, bending and compression resistance, beams and columns are not required for general houses.

Our company's sandwich panel production line has absorbed the strengths of different manufacturers and combined with our own years of practice and research and development, we developed EPS sandwich panels machine and ordinary rock wool sandwich panel forming machine. On this basis, we developed an improved rock wool & EPS integrated sandwich panel forming machine. , Z lock sandwich panel forming machine, PU sandwich panel forming machine, and related supporting equipment.

Feature:
1)Soft hoses and additional automatic controller for easy adjustment of spraying height and angle
2) Large area operation can be achieved without moving machine
3) Inverter for accuracy in flow rate control
4) The control door can be easily opened, so equipment and fixing is very easy.
5) This machine can cutomized equipped with wheels, so it can be moved easily and the wheels can be locked.
6) The face panel is friendly so the operation is easy.

Roof panel with PIR (polyisocyanurate) and PU (polyurethane core). High surface profile.
Application:
Suitable for roofs of industrial buildings: production halls, storage buildings, commercial halls, shopping centres, farm facilities. Steel sheet lining with anticorrosive protection depending on the intended use.

Roof panel with PIR (polyisocyanurate) and PU (polyurethane core). High surface profile.
Application:
Suitable for roofs of industrial buildings: production halls, storage buildings, commercial halls, shopping centres, farm facilities. Steel sheet lining with anticorrosive protection depending on the intended use.

Low Ribbed Wall Sandwich panel with PIR (polyisocyanurate)and PU (polyurethane core).
Application:
Suitable for building external and internal walls of industrial buildings: production halls, storage buildings, commercial halls, shopping centres, farm facilities. Vertical or horizontal installation. Steel sheet lining with anticorrosive protection depending on the intended use.